Nozzle Selection Tools
CP Quick Calc will help determine which tips or orifices best suit application goals.
The Aerial section of the quick calc provides suggested settings with estimated pressures using your data. This gives a starting point that can be entered into the U.S.D.A. droplet models to provide an idea of the probable droplet spectrum. Pattern testing is the next step in verifying that your setup is performing as expected. Operation S.A.F.E. clinics offer Pattern Deposition Analysis to help guide and calibrate equipment to optimum performance. These clinics help you find optimal swath and droplet sizes. Also, the clinics help solve equipment problems before starting a new season.
If you would like assistance finding the suggested settings see the Aerial Nozzle Setup Request form and fill in all the required data to have results sent to you.
The Ground section of the quick calc will provide recommended orifice/tip combination for the selected nozzle with an estimated pressure and expected droplet classification with the setting.
CP Aerial Nozzles App
Built on industry guidelines & USDA-ARS data
Built on industry guidelines and USDA-ARS data, the CP Nozzles App helps you find the right nozzle configuration fast. Enter your application speed, swath, desired flow, and number of nozzles. Get recommended setups with integrated droplet spectrum data. Save configurations and access them anywhere.
* Coming Soon to iOS
Disclaimer:
All Calculations are based on the information you provide. Always verity your nozzles are applying as expected by pattern testing your system after making any changes. Variables within your system can cause differences between calculated results and actual outputs. By using CP’s Quick Calc, I understand the supplied warning above and agree that by using this calculator / am doing so at my own risk, and as such, I agree to hold, Texas Transland LLC harmless for any and all damages.
CP Aerial Nozzles
Narrow down the nozzle options using the CP Quick Calibration tool. This will filter all known settings and show a suggested Orifice/Tip size with an estimated pressure for use. All pressure settings that fall between 30-60psi will be shown.
CP Ground Nozzles
Narrow down the nozzle options using the CP Quick Calibration tool. This will filter all known settings and show a suggested Orifice/Tip size with an estimated pressure for use. All pressure settings that fall between 30-60psi will be shown.
USDA Droplet Models
Narrow down the nozzle options using the CP Quick Calibration tool. This will filter all known settings and show a suggested Orifice/Tip size with an estimated pressure for use. All pressure settings that fall between 30-60psi will be shown.
Setup Request Form
If you would like assistance with suggested settings or comparisons of CP Nozzles, we are happy to help!
Fill out the information on this form, and we will send you the suggested settings for the data you provide.
Please click the “Submit” button once you have entered your information.
